How To Use Water Vapor Fireplace

（1）INSTRUCTION OF USE

Button A–Turn On
Turn On/Off the device only with the switch ON/OFF Button or the RemoteController.
Before turning on the burner,make sure there is enough water inside the burner.Keep Pressing the Button A on the Unit For 3 SECONDS or press on the remotecontroller, the Lights will automatically light on, After 1 second Water Flame willtake place.

Button A– Turn Off
Shut down the device with the switch Button A on the unit or Press on the RemoteController, The burner will turn Off.

Button B– 7 Level Flame Height Adjustable

Button C– 7 Level Flame Speed Adjustable

Button D– Timer Mode

（2）FUNCTIONING MESSAGE

（3）CONNECT TO WATER PIPE

（4）Installation methods

Proper installation method：

Wrong installation method：

（5）CONNECT TO WATER PIPE

A: Only use pure water. 

B:Clean the burners with a soft rag or cloth.

C:Some components are determining the safety and the functioning of yourdevice.

D:Use Water Out to discharge the water out absolutely.lf you want to take the device to another place, please confirm there is no waterin the device.

E:If you will not use it for more than 10days,please use Water Out to dischargethe water out from the burner to keep the tank inside clean.

F:Their replacement may modify the performances of your device. Only originalcomponents must be used during the operations of maintenance, or reparations.This maintenance must only be operated by specialists.Failure to observe this operating manual and its operating instructions as well asunauthorized tampering with the device releases us from any liability and alsoinvalidates the warranty covering the devices and accessories.